Moving heavy pallets between levels in warehouses and worksites is often a necessity for stocking, ordering and saving space. During this process, it is important to maintain safe working standards and practices. Kee Pallet Gates provide permanent protection from hazards when moving goods between different working levels, providing protection for any opening where material and pallet access is required.
Kee Safety Pallet Gates are designed to provide a “retro-fit” solution ensuring that the pallet gate works in conjunction with your existing railing. It can accommodate openings up to 8 feet wide and accommodate a 9 foot depth. The bearings along the pallet gate rails allow a smooth pivot action ensuring a balanced and positive open and close action.
Kee Palet Gate is Available in Four Configurations
The standard size provides excellent load width and depth while also offering 6 ’6” of head clearance.
Three alternate configurations to provide flexibility whether you require extra width, depth or a combination of both, all while providing the same 6’ 6” head clearance.
All four configurations can be built from either aluminum Kee Lite or galvanized steel Kee Klamp components with optional toe-board mounted on all sides for added safety.
Custom sizes and configurations are available upon request. Contact Kee Safety for further information.
Standard Size: 6’ x 5’
Double Depth 5’ x 9’
Double Width: 8’ x 5’
Full Size: 8’ x 9’
Constructed from Kee Safety’s range of galvanized steel or aluminum fittings
Available in four configurations to accommodate 1-4 pallets
Tested to North American standards
Balanced pivot action allows for single operator to use
Easily adjusted on site for precise alignment
Durable, long lasting, and corrosion resistant fittings maximize the life of the system
Customized to fit your specific workplace requirements
System meets or exceeds all relevant testing standards providing an OSHA approved solution
Kee Safety was contacted to specifically address all perimeter roof edge fall protection concerns for this large Dairy facility in California. The buildings had both metal and membrane roof styles and multiple pieces of rooftop equipment that required maintenance. Kee Safety was chosen based on our knowledge, experience and product range to meet the safety concerns and applicable standards for safety on the rooftop. Additionally, we were able to meet their safety needs by providing Licensed California PE Stamped Drawings, Installation and the Certified Manufacturers Installation Inspection.